Lanier GX3000 manual Configure SMB Settings Description, Message, Browse Master

Monitoring and Configuring the Printer

	Settings	Description
	IP Filter Config – Filter #3 End Address	You can specify the IP filter's end address.
Configure SMB
	Settings	Description
	SMB	You can select whether or not to use the SMB protocol.
	Computer Name	You can specify the computer name.
	Workgroup	You can specify the workgroup.
	Comment	You can enter a comment.
	Printing Complete Message	You can select whether or not to issue the Printing Complete
		message.
	Browse Master	You can select whether or not to use the Browse Master.
Configure SNMP
	Settings	Description
	Authentic Community	You can specify the SNMP authentic community name.
	Trap Community	You can specify the SNMP trap community name.
	Trap Address (IP)	You can specify the IP address of the SNMP trap destination.
	SysContact	You can specify SysContact.
	SysName	You can specify SysName.
	SysLocation	You can specify SysLocation.
	Enable Authen Trap	You can enable or disable Enable Authen Trap.
Configure SMTP (Group 1)
	Settings	Description
	SMTP	You can select whether or not to use the SMTP protocol.
	SMTP Server Name	You can specify the name of the SMTP server.
	SMTP Port Number	You can specify the SMTP port.
	Device E-mail Address	You can specify the printer's e-mail address.
	Administrator E-mail Address	You can specify the administrator's e-mail address.
	Text in E-mail	You can enter a shared comment.
Configure SMTP (Group 2)
	Settings	Description
	SMTP	You can select whether or not to use the SMTP protocol.
	SMTP Server Name	You can specify the name of the SMTP server.
	SMTP Port Number	You can specify the SMTP port.
	Device E-mail Address	You can specify the printer's e-mail address.
	Administrator E-mail Address	You can specify the administrator's e-mail address.

220