ADTRAN 6000 Series system manual MANAGEMENT/SNMP Port Configuration

Models: 6000 Series

1 132
Download 132 pages 36.21 Kb
Page 81
Image 81

TRACER 6000 Series Integrated System Manual

Section 5 User Interface Guide

 

 

>MANAGEMENT/SNMP PORT CONFIGURATION

Figure 31 shows the Management/SNMP Port Configuration menu page, which contains the configuration parameters for the 10/100BaseT/TX MGMT Ethernet interface and SNMP configuration parameters (from both the local and remote TRACER 64x0 units).

Figure 31. Management/SNMP Port Configuration

>MANAGEMENT/SNMP PORT CONFIGURATION > IP ADDRESS

Lists the address assigned to the 10/100BaseT/TX MGMT Ethernet port. This address is in dotted decimal notation (four decimal numbers, each in the range of 0 to 255, separated by periods). This value is set to 192.168.0.10 by default. Obtain the correct IP address from your LAN administrator.

>MANAGEMENT/SNMP PORT CONFIGURATION > NET MASK

Defines which part of a destination IP address contains the network number. This address is in dotted decimal notation (four decimal numbers, each in the range of 0 to 255, separated by periods). This value is set to 255.255.255.0 by default. This part of the destination IP address is used along with the TRACER 64x0 IP address to determine which nodes must be reached through the default IP gateway.

>MANAGEMENT/SNMP PORT CONFIGURATION > DEFAULT GATEWAY

Defines or changes the default gateway. You will need a default gateway if the LAN contains multiple segments. This address is in dotted decimal notation (four decimal numbers, each in the range of 0 to 255, separated by periods). This value is set to 192.168.0.254 by default. Contact your LAN administrator for the appropriate address.

>MANAGEMENT/SNMP PORT CONFIGURATION > MAC ADDRESS

(Read Only) Displays the system Ethernet Media Access Control (MAC) address.

>MANAGEMENT/SNMP PORT CONFIGURATION > SNMP MANAGEMENT

Controls SNMP management in the TRACER system. When set to DISABLED, the TRACER system does not send SNMP traps. When set to ENABLED, the TRACER system sends SNMP traps to configured management systems.

612806420L1-1F

Copyright © 2005 ADTRAN, Inc.

81

Page 81
Image 81
ADTRAN 6000 Series MANAGEMENT/SNMP Port Configuration IP Address, MANAGEMENT/SNMP Port Configuration NET Mask