ADTRAN 6000 Series system manual Quad Ethernet

	Section 3 Engineering Guidelines		TRACER 6000 Series Integrated System Manual
		Table 15. At-A-Glance Specifications (Continued)
	Hardware	Description	Specification
Mechanical and Environmental
		Operating Temperature	-25°C to 65°C
			1.7 inch (4.4 cm) H
		Size	17.2 inch (43.7 cm) W
			11.4 inch (28.9 cm) D
		Humidity	95 percent, noncondensing
		Weight	7 lbs (3.18 kg)
Power
		Input Voltage	21 to 60 VDC, either polarity referenced to ground
		Power Consumption	< 25 W
		Connector	2-pin terminal block (DC)
		Fuse	2 A, 250 V slow-blo fuse (2-inch)
Network Modules
Quad T1 Module		Connection	Four RJ-45 interfaces
		Capacity	4xT1 (ANSI T1.403, AT&T® 54016 and 62411)
		Line Code	B8ZS (default), AMI
		Alarms	AIS, Red, Yellow, BPVs, LOS
Quad Ethernet		Connection	Four RJ-45 interfaces
Switch Module
		Interface Type	Four 10BaseT/100BaseTX interfaces with auto MDI/MIDX
			crossover
		Flow Control	Back-pressure flow control on half-duplex interfaces
			Pause-frame flow control on full-duplex interfaces
Quad E1 Module		Connection	Four RJ-45 interfaces
(120Ω Interface)
		Capacity	4xE1 (CCITT G.703)
		Line Code	HDB3 (default), AMI
		Alarms	LOS, LCV, AIS, RMT, OOF, CRC
		Loopbacks	Local and remote line and link
Quad E1 Module		Connection	Single DB-25 connector on module; 75Ω unbalanced interface
(75Ω Interface)			available using BNC breakout panel
		Capacity	4xE1 (CCITT G.703)
		Line Code	HDB3 (default), AMI
		Alarms	LOS, LCV, AIS, RMT, OOF, CRC
		Loopbacks	Local and remote line and link

42 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F