Firmware Upgrade Utility Upgrade Destination

TRACER 6000 Series Integrated System Manual	Section 5 User Interface Guide

>FIRMWARE UPGRADE UTILITY > UPGRADE DESTINATION

Specify the unit to upgrade. The following options are available:

LOCAL IDU	Upgrade the local system.
REMOTE IDU	Upgrade the remote system. When upgrading the remote system, the
	upgrade file is first loaded into the local system and then transferred
	over the wireless link to the remote system. The actual upgrade
	process is not started on the remote system until the entire upgrade
	file has been received.

>FIRMWARE UPGRADE UTILITY > COMMAND

Use this command to start (START) or stop (ABORT) a firmware upgrade. For XMODEM updates, cancel the process via the terminal emulation software (consult your documentation for instructions on how to do this). For TFTP updates, you can cancel the process by selecting ABORT from this field.

>FIRMWARE UPGRADE UTILITY > LOCAL CURRENT STATUS

(Available for TFTP updates only.) Indicates progress or problems encountered during the current upgrade of the local unit. The field displays IDLE if no update is in progress or when the update is successfully completed. At the end of a successful update, the contents of this field are copied into the Local Previous Status. For a detailed listing of these messages, please refer to DLP-5,Updating the Firmware Using TFTP, on page 103.

>FIRMWARE UPGRADE UTILITY > LOCAL PREVIOUS STATUS

(Available for TFTP updates only.) Displays the status of the previous update of the local unit. Following a successful update, this field reads UPGRADE FINISHED SUCCESSFULLY. If an update was unsuccessful, the appropriate error message displays. Refer to DLP-5,Updating the Firmware Using TFTP, on page 103 for more details on available error messages.

>FIRMWARE UPGRADE UTILITY > REMOTE CURRENT STATUS

(Available for TFTP updates only.) Indicates progress or problems encountered during the current upgrade of the remote unit. The field displays IDLE if no update is in progress or when the update is successfully completed. At the end of a successful update, the contents of this field are copied into the Local Previous Status. For a detailed listing of these messages, please refer to DLP-5,Updating the Firmware Using TFTP, on page 103.

>FIRMWARE UPGRADE UTILITY > REMOTE PREVIOUS STATUS

(Available for TFTP updates only.) Displays the status of the previous update of the remote unit. Following a successful update, this field reads UPGRADE FINISHED SUCCESSFULLY. If an update was unsuccessful, the appropriate error message displays. Refer to DLP-5,Updating the Firmware Using TFTP, on page 103 for more details on available error messages.

612806420L1-1F

ADTRAN 6000 Series Firmware Upgrade Utility Upgrade Destination, Firmware Upgrade Utility Command

Models: 6000 Series