ADTRAN 6000 Series system manual DLP-5 Updating the Firmware Using Tftp

DLP-5 Updating the Firmware Using TFTP

Introduction

The TRACER 64x0 supports firmware updates using TFTP or XMODEM. Use the 10/100BaseT/TX MGMT Ethernet port and TFTP from a network server or XMODEM (if your Telnet client supports file transfers), or use XMODEM and the CRAFT interface. This DLP provides the steps for a successful firmware upgrade using the 10/100 BaseT/TX MGMT Ethernet port and a TFTP server. (See DLP-6,Updating the Firmware Using XMODEM, on page 107 for instructions on using XMODEM.)

Tools and Materials Required

•A PC with Telnet client software

•A TFTP server accessible on the network

To prevent electrical shock, do not install equipment in a wet location or during a lightning storm.

Electronic equipment can be damaged by static electrical discharge. Before handling it, put on an antistatic discharge wrist strap to prevent damage to electronic components. Place equipment in antistatic packing material when transporting or storing. When working on equipment, always place it on an approved antistatic mat that is electrically grounded.

612806420L1-1F Copyright © 2005 ADTRAN, Inc. 103