Upgrade fails | ADTRAN 6000 Series instruction

Section 6 DLP-5	TRACER 6000 Series Integrated System Manual

REQUIRED COMMUNICATIONS	Indicates that a problem with the RF link or the service channel is
LINK IS DOWN	preventing a successful remote system firmware upgrade. Before a
	firmware upgrade begins, the system verifies that communication
	between all required parts is operational. If this check fails, the firmware
	upgrade fails.
UPGRADE FAILED	Indicates that the firmware upgrade was unsuccessful.
UPGRADE FINISHED	Indicates that the firmware upgrade completed successfully and the new
SUCCESSFULLY	firmware should be loaded and running.

10.When the update has successfully completed, IDLE displays in the CURRENT UPDATE STATUS field and

UPGRADE FINISHED SUCCESSFULLY displays in the PREVIOUS UPDATE STATUS field.

The TRACER 64x0 will restart immediately and resume operation. During reset and initialization, the RF link between the units will not be operational.

106

Copyright © 2005 ADTRAN, Inc.

612806420L1-1F

Image 106

ADTRAN 6000 Series system manual Upgrade fails

Contents

Tracer 6000 Series To the Holder of the Manual TrademarksAbout this Manual Revision History Document Date Description of Changes Revision Safety Instructions Save These Important Safety Instructions FCC-Required Information Radio Frequency Interface Statement FCC Output Power Restrictions Exposure to Radio Frequency Fields Repair and Return Pre-Sales Inquiries and Applications Support Post-Sale Support Training Table of Contents Copyright 2005 ADTRAN, Inc Contents System Description System Overview Features and BenefitsConfiguration and Management Operational E1 Network Module with 120Ω Interface Quad Ethernet Switch ModuleAvailable Interface Modules E1 Network Module with 75Ω Interface Copyright 2005 ADTRAN, Inc Receiver Sensitivity Antenna Information Receiver PowerLine-of-Sight Other Considerations Decibels LINE-OF-SIGHTTerminology Calculating the Fade Margin Receiver Power Antenna Gain Example Microwave Path with Parameters 21.1 28.8 27.2 34.8 31.7 38.3 33.2 40.8 35.2 42.7 36.7 44.3 Transmitted Power PT Carrier Wavelength λ System Losses L Path Distance dTypical Coaxial Loss for Common Cable Types Path Loss LP LP = 96.6 + 20 ⋅ log10d + 20·log10f Receiver Sensitivity for the Tracer Delivered Bandwidth Receiver SensitivityTracer Antenna Alignment Real-time Signal ValuesAntenna Information Tracer Rssi Test Points Antenna Beam Patterns Fresnel Zones, Earth Curvature, and Antenna Heights Where f is in GHz and d is in miles or Other Considerations Path Availability Terrain Terrain Factor Description Climate Climate Factor Description List of Figures At-A-Glance SpecificationsReviewing the Front Panel Design List of Tables Power Requirements Equipment DimensionsReviewing the Front Panel Design Front Panel LEDs Tracer 64x0 Front Panel Description Name ConnectorRssi Monitoring Interface Tracer 64x0 LEDs AUX RS232 Interface RJ-45 AUX RS232 Pinout Name Source Description Craft Pinout Craft Port DB-9Reviewing the Tracer 64X0 Rear Panel Design Source Description Mgmt 10/100BaseT/TX Connection RJ-48C Antenna Interface N-Type Connector DC Power Connection Plug-In Terminal BlockAlarm Contacts Plug-In Terminal Block Fuse Loss factors 4xT1 Module XT1 Module RJ-45 Connector PinoutNetwork Module Interfaces Pin 4xE1 Module with 120Ω Interface 4xE1 Module with 75Ω Interface DB-25 to 75Ω Unbalanced Cable Pinout XE1 Module with 75Ω Interface DB-25 Connector PinoutE1 Cable Interface DB-25 Male Tracer Side Breakout Panel AT-A-GLANCE Specifications E1 Breakout Panel Encryption Type Quad Ethernet Connecting the Module Interfaces Installing ModulesUnpack and Inspect the System Tools Required Contents of ShipmentIntroduction Unpack and Inspect the System Customer Provides Base System Channel Selection GHz Bandwidth Division Grounding Instructions Mounting Options Supplying Power to the UnitInstructions for Rack Mounting the Tracer Inch Rackmount Illustration Instructions for Installing Network Modules Installing ModulesModule Quad T1 Module Interfaces Connecting the Module InterfacesInstructions for Installing Network Modules Quad E1 120Ω Module Interfaces E1 Connection with Breakout Panel User Interface Guide RF Link Min/Max Received Signal Quality History Navigating the Terminal Menu Terminal Menu Window Menu and System Control Navigating using the Keyboard KeysPassword Protection To do this Press this key System Status Menu DescriptionsModule Status Remote System Status System Alarm StatusRF Status Local System Status Real-Time Signal Values Rx PowerTx Power Navigation Reminders System Configuration Tracer 64x0 Main Menu System Configuration System Time System Configuration Site NameSystem Configuration Serial Number System Configuration System Date System Configuration Password System Configuration Craft Port BaudSystem Configuration Inactivity Logout System Configuration Performance Stats Clear RF Link Configuration RX Power RF Link ConfigurationRF Link Configuration TX Power RF Link Configuration RF Band Plan Channel a Channel B RF Link Configuration Subkey RF Link Configuration Link EncryptionRF Link Performance History Main Screen RF Link Error History RF Link MAX/MIN Received Power History RF Link Max/Min Received Power History RF Link MIN/MAX Received Signal Quality History RF Link Min/Max Received Signal Quality History Datapath Provisioning Module 1/MODULE 2 Channels Datapath ProvisioningDatapath Provisioning Total Active Channels Datapath Provisioning Channel Selection 4XE1 Module CONFIGURATION/STATUS/HISTORY Main Screen E1X STATUS/CONFIGURATION/LOOPBACK E1X STATUS/CONFIGURATION/LOOPBACK Alarm Reporting E1X STATUS/CONFIGURATION/LOOPBACK E1X Interface AlarmsE1X STATUS/CONFIGURATION/LOOPBACK Interface Type E1X STATUS/CONFIGURATION/LOOPBACK CRC4 Detection E1X STATUS/CONFIGURATION/LOOPBACK LOOP/NORMAL State E1X STATUS/CONFIGURATION/LOOPBACK Line CodeE1X STATUS/CONFIGURATION/LOOPBACK LOOP/NORMAL State Normal E1 Remote Line Loopback E1x Link Performance History T1 Module CONFIGURATION/STATUS/HISTORY Main Screen T1X STATUS/CONFIGURATION/LOOPBACK T1X STATUS/CONFIGURATION/LOOPBACK T1X Line Build OUT T1X STATUS/CONFIGURATION/LOOPBACK T1X Interface AlarmsT1X STATUS/CONFIGURATION/LOOPBACK Alarm Reporting T1X STATUS/CONFIGURATION/LOOPBACK Signaling T1 Local Link Loopback T1 Remote Link Loopback T1X Performance History T1x Link Performance History Ethernet Switch Configuration Ethernet Switch Module Configuration Ethernet Switch Status Ethernet Switch Configuration PortEthernet Switch Configuration SPEED/DUPLEX Ethernet Switch Status TX Packets Ethernet Switch Status RX Packet Errors Ethernet Switch Status RX PacketsEthernet Switch Status RX Packets Dropped MANAGEMENT/UTILITIES Main Screen MANAGEMENT/SNMP Port Configuration NET Mask MANAGEMENT/SNMP Port ConfigurationMANAGEMENT/SNMP Port Configuration IP Address MANAGEMENT/SNMP Port Configuration Default Gateway MANAGEMENT/SNMP Port Configuration Snmp Trap Community MANAGEMENT/SNMP Port Configuration Snmp GET CommunityMANAGEMENT/SNMP Port Configuration Snmp PUT Community MANAGEMENT/SNMP Port Configuration Snmp Trap Host #0 #4 Ping Utility Delay Ping Utility Timeout MSPing Utility Ping Command Ping Utility Number of Packets Firmware Upgrade Utility Tftp Server Firmware Upgrade UtilityFirmware Upgrade Utility File Xfer Method Firmware Upgrade Utility Tftp Filename Firmware Upgrade Utility Local Current Status Firmware Upgrade Utility Upgrade DestinationFirmware Upgrade Utility Command Firmware Upgrade Utility Local Previous Status RF Link Management Bridge Configuration RF Link Management Bridge Configuration Bridge Operation System Alarms Link Alarm RF Link Management Bridge Configuration Inactivity TimeoutSystem Alarms System Alarms FAN Alarms System Alarms Temp Alarms System Alarms Persistent Alarms Detail Level Procedures Copyright 2005 ADTRAN, Inc Introduction Prerequisite ProceduresTools and Materials Required Using the Craft Port Perform one of the following steps DLP-2 Logging into the Tracer Perform the steps below in the order listed DLP-3 Setting IP Parameters for the Tracer DLP-3 Tracer 6000 Series Integrated System Manual 612806420L1-1F Copyright 2005 ADTRAN, Inc DLP-3 Tracer 6000 Series Integrated System Manual DLP-4 Verifying Communications Over an IP LAN Perform the following steps in the order listed 612806420L1-1F 101 102 DLP-5 Updating the Firmware Using Tftp IDU R Eset New firmware image must be received and stored in the remote Upgrade fails DLP-6 Updating the Firmware Using Xmodem DLP-6 Tracer 6000 Series Integrated System Manual 111 110114 MIBs Supported by the Tracer Mibs Supported by the TracerMIB Compilation Order MIB Compilation Order MIB Traps Supported by the TracerTraps Supported by the Tracer Trap This trap indicates that 112 Copyright 2005 ADTRAN, Inc 612806420L1-1F Copyright 2005 ADTRAN, Inc 113 MIB Variables for ad.mi2 MIB Variables Supported by the TracerMIB Variables for ads1.mi2 MIB Variables for TRACER6000.mib 116 Copyright 2005 ADTRAN, Inc Listed variable only applies to Tracer high power systems 118 Copyright 2005 ADTRAN, Inc 612806420L1-1F Copyright 2005 ADTRAN, Inc 119 120 Copyright 2005 ADTRAN, Inc 612806420L1-1F Copyright 2005 ADTRAN, Inc 121 122 Copyright 2005 ADTRAN, Inc 612806420L1-1F Copyright 2005 ADTRAN, Inc 123 124 Copyright 2005 ADTRAN, Inc Overview LED Indicators Installing/Troubleshooting the Tracer Hardware TST LED LED Indicators PWR LEDOverview RF DWN LED T1 Interface Alarms RF LOW LED E1 Interface Alarms BPV RF Errors System AlarmsLAN LEDs STEP-BY-STEP Troubleshooting INSTALLING/TROUBLESHOOTING the Tracer Hardware 612806420L1-1F Copyright 2005 ADTRAN, Inc 131 Installing/Configuring E1 Hardware Installing/Configuring T1 HardwareInstalling/Configuring Ethernet Hardware