ADTRAN 6000 Series system manual Ping Utility Number of Packets, Ping Utility Packet Size Bytes

TRACER 6000 Series Integrated System Manual Section 5 User Interface Guide

>PING UTILITY > NUMBER OF PACKETS

Specifies the number of ping packets to send to the IP address specified in the PING ADDRESS field. The default value is 4, and the maximum value is 99.

>PING UTILITY > PACKET SIZE (BYTES)

Specifies the size (in bytes) of the data portion of the ping request. The default value is 64 bytes, and the maximum size is 1472 bytes.

>PING UTILITY > TIMEOUT (MS)

Specifies the time (in milliseconds) to wait for a ping reply before timing out. The default timeout is 3 seconds (3000 milliseconds), and the maximum value is 10 seconds (10000 milliseconds).

>PING UTILITY > PING COMMAND

Use this field to manually start (START) or stop (ABORT) a ping request, reset the ping statistics (RESET STATS), or return the ping configuration parameters to their default values (DEFAULT VALUES).

>PING UTILITY > DELAY

(Read Only) Displays the round trip time (in milliseconds) of the ping request/reply of the current set of pings and provides the following information:

MINIMUM	The minimum round trip time of the ping request/reply for the
	current set of pings.
MAXIMUM	The maximum round trip time of the ping request/reply for the
	current set of pings.
AVERAGE	The average round trip time of the ping request/reply for the
	current set of pings.

>PING UTILITY > PACKETS

(Read Only) Displays the packet statistics for the ping request/reply of the current set of pings and provides the following information:

TX	The number of ping requests transmitted.
RX	The number of ping replies received.
LOST	The number of ping requests that did not receive replies.

612806420L1-1F Copyright © 2005 ADTRAN, Inc. 83