ADTRAN 6000 Series system manual IDU R Eset

Section 6 DLP-5 TRACER 6000 Series Integrated System Manual

Perform the following steps in the order listed.

1.Connect to the TRACER 64x0 using the 10/100BaseT/TX MGMT interface.

If you are not already connected to the unit’s 10/100BaseT/TX MGMT port using Telnet client software, use the procedure in DLP-3,Setting IP Parameters for the TRACER 64x0, on page 95 to connect to the unit.

2.Press m to go to the Main menu page.

3.Select the MANAGEMENT/UTILITIES menu and press <Enter>.

4.Select the FIRMWARE UPGRADE UTILITY menu and press <Enter>.

5.Go to the FILE XFER METHOD menu and select TFTP. The TRACER 64x0 can use a TFTP server connected to the same Ethernet network as the local unit or a TFTP server connected to the same Ethernet network as the remote unit. Make the appropriate selection for your setup (choices are

TFTP-LOCAL MGMT PORT or TFTP-REMOTE MGMT PORT).

6.Go to the TFTP SERVER field and enter the IP address of the network TFTP server.

7.Go to the TFTP FILENAME field and enter the filename of the firmware. TRACER 64x0 firmware files have a .bin extension. When specifying the filename, include the full path if the firmware file is not located in the TFTP default location. For example, to use a firmware file in the c:\firmware folder on your local machine, enter c:\firmware\myfirmware.bin into the TFTP FILENAME field.

8.Select the UPGRADE DESTINATION. Using TFTP provides the capability to upgrade both sections of the local and remote units. Valid choices are LOCAL IDU and REMOTE IDU.

9.View CURRENT UPDATE STATUS to verify the progress of the current firmware update or to identify any errors encountered during the download.

During the TFTP upload, the following status messages display in CURRENT UPDATE STATUS to indicate the progress of the upload:

IDLE	No active firmware upgrade.
IDU RESET	Indicates the firmware file transfer to the IDU is complete and the
	system is rebooting to load the new firmware.
UPGRADE ABORTED	Indicates the firmware upgrade was manually aborted by selecting
	ABORT from the COMMAND field.
CONTACTING TFTP SERVER	Indicates communication with the TFTP network server is trying to be
	established with the specified server address in the TFTP SERVER IP
	ADDRESS field.
REQUESTING TFTP OF	Indicates the TRACER 64x0 is requesting TFTP access to the given
FILENAME	update filename and path. Please verify appropriate user rights are
	selected for the specified path.
TFTP TRANSFER IN	Indicates communication with the TFTP network server has been
PROGRESS	established and the update file is being transferred between the
	TRACER 64x0 and the TFTP network server.
UPGRADE IMAGE IS VALID	Indicates that the system image was verified as a valid image for
	the specified update. Before the firmware upgrade begins, the
	TRACER 64x0 verifies that the image is valid. If it is not valid for the
	system, UPGRADE IMAGE IS INVALID displays.

104 Copyright © 2005 ADTRAN, Inc. 612806420L1-1F