ADTRAN 6000 Series Network Module Interfaces, 4xT1 Module, XT1 Module RJ-45 Connector Pinout

TRACER 6000 Series Integrated System Manual Section 3 Engineering Guidelines

5.NETWORK MODULE INTERFACES

4xT1 Module

The 4xT1 network module has four T1 interfaces (through four RJ-45 ports) that provide the following functions:

•ANSI T1.403 and AT&T® 54016 and 62411 compliant

•AMI or B8ZS coding

•Extended Super Frame (ESF) and Super Frame (SF) framing support

•Manual line build out

•Network performance monitoring and reporting

•Test loopbacks (both line and link)

Table 10 provides the RJ-45 interface pinout for the 4xT1 network module.

		Table 10. 4xT1 Module RJ-45 Connector Pinout
Pin	Name		Description
1	R		Transmit data (ring) towards the network
2	T		Transmit data (tip) towards the network
3, 6-8	UNUSED		—
4	R1		Receive data (ring) toward the network
5	T1		Receive data (tip) from the network

Quad Ethernet Switch Module

The Quad Ethernet Switch module has four 10/100BaseTX interfaces (through four RJ-45 ports) that provide the following functions:

•IEEE 802.3 and 802.3u compliant

•Auto MDI/MDIX crossover

•Back-pressure flow control on all full-duplex interfaces

•Link and activity LEDs for each port

Table 11 provides the RJ-45 interface pinout for the Quad Ethernet Switch module.

Table 11. Quad Ethernet Switch RJ-45 Connector Pinout

Pin	Name	Source	Description
1	RX1	Attached Equipment	Receive Positive
2	RX2	Attached Equipment	Receive Negative
3	TX1	Module	Transmit Positive
4, 5	Unused	N/A	—
6	TX2	Module	Transmit Negative
7, 8	Unused	N/A	—

612806420L1-1F Copyright © 2005 ADTRAN, Inc. 37