Section 3 Engineering Guidelines

TRACER 6000 Series Integrated System Manual

 

 

1.EQUIPMENT DIMENSIONS

The TRACER 64x0 integrated radio is 17.2 inch (43.7 cm) W, 11.4 inch (28.9 cm) D, and

1.7 inch (4.4 cm) H, weighs 7 pounds (3.18 kg), and can be used in rackmount configurations.

2.POWER REQUIREMENTS

The TRACER 64x0 radio has a maximum power consumption of 25 W and a maximum current draw of 1.1 A (at 21 VDC).

3.REVIEWING THE FRONT PANEL DESIGN

The front panel contains an RSSI monitoring interface, a GND interface for reference with RSSI, a TEST interface for factory use only, a DB-9 CRAFT PORT for management and configuration, an AUX RS232 interface (RJ-45) that provides an end-to-end serial port interface (at 9600 bps), and status LEDs to provide visual information about the TRACER 64x0 system. Figure 1 identifies the various interfaces and LEDs for the TRACER 6410 and TRACER 6420 (L2). Figure 2 identifies the various interfaces and the LEDs for the TRACER 6420 L1. Table 1 on page 31 provides a brief description of each interface.

BE F

ACD

Figure 1. TRACER 6410 and TRACER 6420 (L2) Front Panel Layout

BE F

ACD

Figure 2. TRACER 6420 (L1) Front Panel Layout

30

Copyright © 2005 ADTRAN, Inc.

612806420L1-1F

Page 30
Image 30
ADTRAN 6000 Series system manual Equipment Dimensions, Power Requirements, Reviewing the Front Panel Design