ADTRAN 6000 Series system manual Navigating the Terminal Menu, Terminal Menu Window

TRACER 6000 Series Integrated System Manual Section 5 User Interface Guide

1.NAVIGATING THE TERMINAL MENU

The TRACER 64x0 menu system can be accessed with a VT100 compatible terminal that is connected to the CRAFT PORT (located on the front of the unit) and set to 9600 bits per second (default), 8 data bits, 1 stop bit, and no parity. Flow control on the serial interface should be configured to NONE for proper operation. Once a terminal is connected, press <Enter> until the login screen appears. The default password for the TRACER 64x0 is password.

All TRACER 64x0 passwords are case-sensitive.

Terminal Menu Window

The TRACER 64x0 uses a series of menu pages and a single Main menu page to access its many features. The Main menu page (see Figure 1) provides a link to all available configuration/status pages.

After connecting a VT100 terminal to the TRACER 64x0, press <Ctrl + l> or <Ctrl + r> to redraw the current screen.

Figure 1. Main Menu Screen

612806420L1-1F Copyright © 2005 ADTRAN, Inc. 55