ADTRAN 6000 Series RF Link Configuration Link Encryption, RF Link Configuration Subkey

TRACER 6000 Series Integrated System Manual Section 5 User Interface Guide

>RF LINK CONFIGURATION > LINK ENCRYPTION

The TRACER 64x0 provides triple-DES (3DES) encryption of the data passed over the RF Link. When LINK ENCRYPTION is set to ENABLED, the TRACER 64x0 sequentially applies the three keys entered in the SUBKEY 0, 1, and 2 fields to each 64-bit block of data transmitted over the RF link. The remote TRACER 64x0 uses the same keys to decrypt each block. (The keys entered in the local and remote systems must be identical.)

>RF LINK CONFIGURATION > SUBKEY (0-2)

The TRACER 64x0 provides 3DES encryption of the data passed over the RF Link. When LINK

ENCRYPTION is set to ENABLED, the TRACER 64x0 sequentially applies the three keys entered in the SUBKEY 0, 1, and 2 fields to each 64-bit block of data transmitted over the RF link. The remote TRACER 64x0 uses the same keys to decrypt each block. (The keys entered in the local and remote systems must be identical.) Valid entries are numbers 0 through 9 and letters a through f.

>RF LINK PERFORMANCE HISTORY (MAIN SCREEN)

Figure 8 shows the TRACER 64x0 RF Link Performance History main screen, which contains the transmit and receive power settings and band plan configuration for both the local and remote units.

Figure 8. RF Link Performance History (Main Screen)

612806420L1-1F Copyright © 2005 ADTRAN, Inc. 65