XT55 AVL Software Instructions User’s Guide Confidential/Preliminary
s
mobile
$PSRF112, value, *XX
Parameter description:
value: //configure history function
Defined values
1 //enables history
2 //disables history
*XX | //CheckSum has to be calculated. |
Example 1:
$PSRF112,1*38
This command enables the history function. The module XT55 records every 180 seconds if the vehicle is driving faster than 10 km/h.
The settings 180 sec. and 10km/h are predefined parameters.
Example 2:
$PSRF112,2*3B
This command disables the history function. No data will be saved in the history.
Commands build in the alarm function
$PSRF112, value, key_number, phone_number *XX
Parameter description: |
|
|
value: | //configure the download procedure | |
| Defined values | |
| 10 | //enables key configuration |
| 11 | //disables key configuration |
| 12 | //displays key number |
key_number | //determine the alarm key (1,2 possible) | |
phone_number | //set the authorized telephone number | |
*XX | //CheckSum has to be calculated. | |
Example 1:
$PSRF112,10,2,012345678 *02
This command enables key configuration as well the predefined RMC protocol is send to the authorized telephone number (012345678) in case of an alarm on the key 2.
Example 2:
$PSRF112,11,2*17
This command disables the key (2) configuration.
Example 3:
$PSRF112,12,2*14
This command displays the settings of given key number (2).
The received format is: $alarm key (2): phone: 012345678, protocol: RMC
Command for internal test
$PSRF111, | Parameter description: | ||
value, | value: | //commands overview | |
*XX | |||
| Defined value | ||
|
| ||
|
| 0 //overview of all implemented test commands | |
| *XX | //CheckSum has to be calculated. | |
Example 1:
$PSRF111,0*3A
XT55_avl_ug_V01 | Page 17 of 20 | 15.03.2004 |
