Siemens XT55 manual Value //configure the download procedure

XT55 AVL Software Instructions User’s Guide Confidential/Preliminary

s

mobile

$PSRF111, value, *XX

Parameter description:

value: //configure the download procedure

Defined values

1//reports the version number of software and hardware

3//performs the test of Flash

30//performs the test of debugging

4//performs the test of serial port

5//performs automatic test

50//performs automatic test (Siemens pre-test)

7//performs the test of GSM board continuity

70//information about the malfunctional tracks

8//performs the test of all GPIOs

80//information about the malfunction of GPIOs

81//reports the current state of each read GPIOs (endless loop)

9//information about the current voltage of antenna.

90//calibration points, calculated voltage and current.

*XX //CheckSum has to be calculated.

Example 1:

$PSRF111,1*3B

Responds: current version: SW:XT_GPS_220_V0.95 HW:XT_GPS_B2.2_rev01a

Example 2:

$PSRF111,3*39

Responds: ERROR or SUCCESS

Example 3:

$PSRF111,30*09

Responds: Information about the performed flash test

Example 4:

$PSRF111,4*3E

Responds: ERR-malfunction detected or OK-serial port 2 successfully tested

Example 5:

$PSRF111,5*3F

Responds: ERROR GPIO or SUCCESS ERROR COM2

ERROR GPIO COM2

Example 6:

$PSRF111,50*0F

Responds: ERROR GPIO or SUCCESS ERROR COM2

ERROR GPIO COM2

Example 7:

$PSRF111,7*3D

Responds: ERROR or SUCCESS.

Example 8:

$PSRF111,70*0D

Responds: Verbose information about malfunctional tracks

Example 9:

$PSRF111,8*32

Responds: ERR-malfunction detected or OK-all GPIOs successfully tested

Example 10:

$PSRF111,80*02

Responds: Verbose information about malfunctional GPIOs.

XT55_avl_ug_V01 Page 18 of 20 15.03.2004