Lanier GX3000 Tocol, You can specify the DNS setting, You can specify the IP filters end address

Monitoring and Configuring the Printer

5 : Configure SNMP

6 : Configure SMTP

7 : Configure SMTP (Group 1)

8 : Configure SMTP (Group 2)

9 : Configure SMTP (Group 3)

10 : Configure SMTP (Group 4)

96 : Display Status

97 : Reset Settings to Defaults

98 : Restart Print Server

99 : Exit

Configure General

	Settings	Description
	Change root Password	You can change the administrator's password.
	LAN Interface	You can specify which interface to use.
Configure TCP/IP
	Settings	Description
	DHCP/BOOTP	You can select whether or not to use the DHCP/BOOTP pro-
		tocol.
	RARP	You can select whether or not to use the RARP protocol.
	IP Address	You can specify the static IP address.
	Subnet Mask	You can specify the subnet mask.
	Default Gateway	You can specify the gateway address.
	Host Name	You can specify the host name.
	Use DHCP Domain Option	You can select whether or not to use the DHCP domain op-
		tion.
	Domain	You can specify the domain name.
	IPv6 Function	You can select whether or not to use IPv6.
	DNS	You can specify the DNS setting.
	IP Filter Config – Filter Mode	You can specify the IP filter operating mode.
	IP Filter Config – Filter #0 Start Address	You can specify the IP filter's start address.
	IP Filter Config – Filter #0 End Address	You can specify the IP filter's end address.
	IP Filter Config – Filter #1 Start Address	You can specify the IP filter's start address.
	IP Filter Config – Filter #1 End Address	You can specify the IP filter's end address.
	IP Filter Config – Filter #2 Start Address	You can specify the IP filter's start address.
	IP Filter Config – Filter #2 End Address	You can specify the IP filter's end address.
	IP Filter Config – Filter #3 Start Address	You can specify the IP filter's start address.

219