Lanier GX3000 manual Troubleshooting

Troubleshooting

Troubleshooting
Printing Will Not Start		79
Power Cannot Be Turned On		79
Paper Will Not Feed Even When the Power Is On		79
An Error Occurs		79
Points to Remember when Printer Sharing under Windows 98/Me		80
Paper Is Not Fed or Delivered Normally		81
Paper Jam		82
Removing Paper Jammed in the Paper Tray (Tray 1)		82
Removing Paper Jammed in the Bypass Tray (optional)		83
Removing Paper Jammed under the Top Cover		86
Removing Paper Jammed around the Guide Board		87
Removing Paper Jammed in the Duplex Unit		89
Removing Paper Jammed in the Output Tray		90
Print Results Are Not Satisfactory		92
Checking the Condition of the Printer		92
Printing Is Uneven, Too Heavy, or Too Light		92
Dirty or Blotted Prints		93
Checking the Printer Driver Setting		93
Changing the Printer Driver Setting		93
Colours Do Not Match the Displayed Image		95
Positions Do Not Match the Displayed Image		96
Error & Status Messages on the Control Panel		97
Status Monitor Errors		100
Status Monitor Does Not Open		100
No Response from Printer		100
No Paper/Tray Not Detected (Tray 1)		100
Printing by Form Feed		101
Canceling the Print Job		102
No Paper/Tray Not Detected (Bypass Tray)		102
Press the [#Enter] key		103
Paper Size Mismatch/Paper Type Mismatch (Tray 1)		103
Printing by Form Feed		103
Canceling the Print Job		104
Paper Size Mismatch/Paper Type Mismatch (Bypass Tray)		105
Printing by Form Feed		105
Canceling the Print Job		106
J0076605_1.00	Copyright © 2005 All rights reserved.	77