The remote isn’t working.
•Make sure the plastic tab has been removed from the battery compartment.
•Replace the remote battery with a new one.
•Point the remote directly at the Sound Bar when pressing a button.
•If using a Bluetooth connection, some of the buttons on the remote may not be supported by the streaming application. (e.g., a music streaming app may not support the Back/Fast Rewind button.)
How do I listen to SRS TruSurround or Dolby Digital?
•To activate SRS TSHD, press the Menu button on the remote and use the arrow keys to scroll to the TSHD screen to toggle between on and off.
•To listen to Dolby Digtal, your device must be playing content in Dolby Digital format. Dolby Digital is only available over Digital Coaxial or Digital Optical.
When should I use Night Mode or SRS TruVolume™?
•Night mode reduces bass output of the Sound Bar so that listening to the bar is less likely to disturb others. SRS TruVolume™ reduces high volume content like commercials and increases low volume content, like dialog, so that you have a more uniform listening experience. Night Mode and SRS TruVolume can be turned on independently or together. • To listen to Dolby Digtal, your device must be playing content in Dolby Digital format. Dolby Digital is only available over Digital Coaxial or Digital Optical.
I would like to adjust the sound on the Sound Bar.
•Adjust the bass and trebel levels using the remote
•Try enabling/disabling SRS TruSurround.
•Disable Night Mode if bass level is too low by pressing the Menu button on the remote and adjusting the settings.
I want to return my Sound Bar to factory settings.
•Press and hold the Power, Volume Up, and Volume Down buttons for 10 seconds to return your Sound Bar to its factory default settings.
