VIZIO SV320XVT & SV370XVT User Manual
Connecting an External Receiver/Amp
STEREO SYSTEM
1.Turn off the power to the HDTV and Receiver/Amp.
2.Using an audio cable (white and red connectors), connect the cable to the audio input connectors on the Receiver/Amp and connect the other end to the AUDIO OUT audio connectors at the rear of the HDTV.
3.Turn on the power to the HDTV and Receiver/Amp.
4.Then press the MENU button on the remote control to open the
5.Press ▼ on the remote control to highlight the Audio menu, then press OK to select.
6.Press ▼ on the remote control to select SPEAKERS.
7.Press ► on the remote control to select OFF so the sound from the HDTV will be routed through your Receiver/Amp system.
Note:
∙Refer to your Receiver/Amp user manual to select the corresponding audio input.
∙The audio output is not amplified and cannot be connected directly to external speakers.
Optical Output of audio received with HD Programs
If your sound system has a SPDIF (optical) digital audio input you can connect it to the OPTICAL digital audio out at the rear of the HDTV. This is active when receiving audio with the programs being viewed no matter what input is being used.
Version 12/1/2009 | 25 |
| www.VIZIO.com |
