Connecting USB Devices
To use a USB accessory with your Stream Player, connect it to the USB port on the back of the device.
Removing a USB Storage Device
When removing a USB storage device, it is important to unmount/ eject the drive to prevent damage and/or data loss.
To unmount/eject your USB storage device:
1.Press the V Button on the remote.
2.Use the Arrow buttons or the Trackpad to select the * icon at the top
If the notifications are not displayed, select Ongoing to open the notification list.
3.Use the Arrow buttons to highlight the name of your USB storage device and press OK.
Your device is ejected. It is safe to disconnect the device.
3
Using Bluetooth Accessories with the
To use a Bluetooth accessory with your Stream Player, you need to pair it with the Stream Player.
To pair your accessory:
1.Make sure your accessory is in “discoverable” mode.
2.Press the V Button on the remote.
3.Select Devices and use the remote to navigate to Bluetooth.
4.Select Pair device. The Stream Player will scan for your accessory.
5.Select your device from the list to pair it with the Stream Player.
If you are listening to bluetooth headphones and there is no sound, press the V Button and navigate to Settings > Audio and change the HDMI Out setting to PCM.
To disconnect your Bluetooth accessory,
1.Press the V Button on the remote.
2.Select Devices and use the remote to navigate to Bluetooth.
3.Select your device from the list of paired accessories and use the remote to switch the device pairing to Off.
You may need to
31
