VBR333
Changing the Blu-ray 3D Mode
Your player’s default 3D setting is Automatic, meaning that the player will detect 3D
If you would like to deactivate this automatic detection and always view
To change the
1.From the Display menu, use the Up/ Down Arrow buttons on the remote to highlight
SELECT.
The
2.Highlight Automatic or Forced 2D and press SELECT.
Adjusting the Audio Settings
The settings in the Audio Menu configure the player’s digital audio outputs (HDMI, Coaxial, or Optical/SPDIF).
The Audio Menu settings will not affect any audio output from the analog L and R (left and right) ports. The audio settings are for digital output only.
To access the Audio Menu:
1.Turn on the player and your TV. Use the Arrow buttons on the remote to highlight Settings and press SELECT.
The Settings menu is displayed.
4
2.Use the Arrow buttons on the remote to highlight Audio and press SELECT.
The Audio
Changing the PCM Downsampling Rate
This setting should be adjusted if your home audio receiver can process
If you are unsure about how to adjust this setting, leave the PCM Downsampling rate at 48 kHz.
Changing this setting has no effect if your audio is connected via HDMI cable.
If you have the player connected to a home audio receiver and your receiver can process
1.From the Audio menu, use the Up/ Down Arrow buttons on the remote to highlight PCM Downsampling and press SELECT.
The PCM Downsampling menu is displayed.
2.Highlight the highest downsampling rate your reciever can process and press SELECT. (Devices differ; see your receiver’s user manual for details.)
23
