Nut

Terminal Rings

Connector

Bolt

FIGURE 3. - Ring Terminal Connection Diagram

NOTE: ALWAYS disconnect the AC power cord from the AC power outlet before con- necting (or disconnecting) the charger to (or from) the battery.

CONNECTING THE CHARGER WITH TERMINAL RINGS

The charger’s output leads have crimped, color-coded ring terminals (Figure 4) (RED-POSITIVE and BLACK- NEGATIVE). These rings connect directly to the corre- sponding connectors on the battery posts.

1.Remove the nuts from the bolts of the battery post’s connectors.

2.Position the RED terminal on the bolt of the POSI- TIVE battery post connector.

3.Position the BLACK terminal on the NEGATIVE post connector; then replace the nuts. (Figure 3)

Black

Red

FIGURE 4. Terminal Rings

4.If there is any problem connecting the output leads, check with a reputable auto supply store or contact the Customer Service Department toll free (866) 584- 5504 for assistance in finding an appropriate connection device for your par- ticular application.

6

Page 7
Image 7
Vizio VEC080 owner manual Black Red