VIZIO VMT37-60S User Manual

Concrete Walls

B

A

A.Mark and drill holes

1.Tape the included Wall Mount Template to the wall. Hold the wall plate [1] up to the Wall Mount Template and use the built-in level to make sure it is level. Put the wall plate [1] aside.

2.Drill 6 holes with a 1/2” masonry bit, 2-1/2” deep where indicated. Remove the Wall Mount Template.

B.Install anchors

1.Install the provided anchors [5] in the holes, flush with the wall so that the hinged end faces out.

C.Anchor mount to wall

1.Using a 1/2” wrench or socket, attach the wall plate [1] to the wall with the supplied lag bolts and washers [3] & [4].

2.Use the level before tightening bolts.

Note: It is important to make sure the wall plate is level.

Note: Do not over-tighten lag bolts. Tighten only until they are firmly against the wall plate.

C

Version 10/16/2009

7

 

www.VIZIO.com

Page 7
Image 7
Vizio VMT37-60S user manual Concrete Walls, Install anchors