VIZIO
Connect Cables
Caution: Do not run any cables near moving parts.
1.Tilt TV up and insert pin [04] into the “UP” position. See next step.
2.Insert IR receiver jack [07] into the control box, and attach the head of the IR receiver to the bottom of the TV so it is visible from the front.
3.Insert one end of the optical cable [08] to the control box and the other end to the Digital Optical Audio Output on the back of the TV.
4.Insert the AC adapter jack [06] into the control box, and then into an electrical outlet.
Version 6/23/2009 | 9 |
| www.VIZIO.com |
