VIZIO VU42L FHDTV10A User Manual
4.18.3 Setting the Sleep Timer
The Sleep Timer lets you set a time delay to turn off the LCD HDTV automatically. To set the Sleep Timer using the remote control:
1.Press the SLEEP button on the remote control. The Sleep Timer appears in the center of you screen.
2.Press the SLEEP button one or more times to select the time you want. The choices are 30, 60, 90 or 120 minutes.
To turn off the sleep time using the remote control, press the SLEEP button repeatedly until Off appears on the screen.
4.19 Programming the VIZIO Universal Remote Control
You can program the remote control to work with up to four different pieces of equipment including your VIZIO VU42L FHDTV10A. Listed below are the steps for programming your VCR, Cable Box and DVD Player.
4.19.1Programming for VCR
1.Manually turn on the VCR.
2.Press the VCR button on the remote control.
3.Press and hold the SET button until the LED LIGHT flashes twice.
4.Find the programming code for your VCR in the code list in the back of this book and enter it using the Number Buttons. If the code is accepted, the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code listed for the component and manufacturer.
5.Point the remote control at the VCR and press the POWER button. The VCR will turn off.
Note:
a)If your VCR does not respond, try all the codes for your VCR brand. If the codes do not work, or your brand is not listed, see “Searching for Component Codes.”
b)Sometimes a code listed will only include limited functions. Try other codes that may include more functionality.
Version 12/17/2007 | 59 |
| www.VIZIO.com |
