VIZIO VUR8 Universal Remote User Manual
3.0 Teaching Remote Control
It is recommended that both remotes have fresh batteries for the teaching function.Place teaching and learning remote controls no farther than 2” apart. If elapsed time between pressing keys is 10 seconds or longer the remote control will exit programming mode requiring you to start from Step 1.
3.1.1 Teaching the remote
1.Press and hold down the SET key until led blinks twice.
2.Input code 9 7 5, led blinks twice to confirm code acceptance.
3.Press the Mode key. (DVD, Audio, Cable or TV).
4.Press key to be learned. LED will blink rapidly.
5.Press and hold key to be taught on teaching remote control.
6.Led will stop blinking rapidly, then blink twice to confirm key has been programmed.
7.Repeat Steps 3 through 6 until all desired keys are taught into your remote control.
8.Exit learning mode by pressing SET or by waiting 10 seconds (time out).
3.1.2Clearing Memory
1.Press and hold down Set until Led blinks twice
2.Input code 9 8 1, led blinks twice signaling code acceptance.
3.In Step 2, code 9 7 7 can be used in instead.
The remote control is now ready to be programmed with original codes.
Version 2/17/2009 | 18 |
| www.VIZIO.com |
