VW22L10T HDTVQUICKSTART GUIDE
Programming your TV to Receive and Display Channels: All you need is your Remote Control.
Attaching the Base
STEP 1.1
Important: The Base of the HDTV must be assembled prior to usage.
Place the VW22L face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to
the HDTV.
Carefully align and insert the Base to the stand (please refer to the illustration to the right).
Gently push the Base towards the HDTV until the locking mechanism locks into place.
Receiving Channels through DTV/TV Input using Regular
Antenna or Regular Cable Service (No Box) Signals.
STEP 2.1
Connect your signal source (cable
from antenna or cable from the wall for Cable Service without box) directly to the DTV/TV RF (commonly named COAXIAL) connector.
STEP 2.2
Turn on the TV; press the MENU key to obtain the above display. By default the TV will
show over the air (OTA) signal, press | button to highlight Tuning Band. Press | again if | |
the signal is cable service. |
|
| |
Press the | button to select Auto Search, for either OTA or Cable Service the following | ||
display will show up.
Displaying Channels from different Signal Sources (External TV Tuner, VCR, Cable Box or Satellite Receiver) through different Inputs.
STEP 3.1
Select the correct input connection; RF (DTV/TV)*
connector, Composite (Yellow, Red and White)* connectors, Component (Red, Green, Blue plus Red and White)* connectors, HDMI* connectors or
STEP 3.2
Turn on the TV set
Select the input by pressing the button corresponding to that specific type of connection on the remote control.
If you have an HD service you must use the HDMI (best) or Component connection.
NOTE: Composite and
Insert the provided
Use a Phillips screwdriver to tighten the Base to the stand.
Please wait for the TV to complete this process or press the EXIT key to cancel the scanning process.
After completing the scanning,the display will show the first found channel.
Turn on your Cable Box, VCR, External TV Tuner or Satellite Receiver and you will see a picture on your TV set. If there is not a picture, make sure you have selected the correct input on the TV set.
If the selected input is RF connection, you should be aware that the TV set needs to be on either channel 3 or channel 4 matching the channel which has been selected on the back of the VCR, Cable Box, External TV Tuner or Satellite Receiver; please refer to the Owner or
User’s Manual of such equipment for details.
NOTE: The TV set will be displaying any television station or program selected by the Cable Box, VCR, External Tuner or Satellite Receiver. The TV set will not be able to change programs or channels; this is controlled by the equipment sending the signal. If the service being used is the one which setup includes a box with two different outputs for two different (distant) rooms, then scanning channels would help you to find the signal. Be aware that the channel to be selected varies from provider to provider; meaning that, you may have to call your provider company so they could provide you the specific channel when using high definition made TV sets. Some examples of these channels are: 105, 106, 115 and 116.
*For Your Information:
Coaxial connection (RF connector) is recognized as the threaded connector, commonly called cable, screw on or coaxial connector which carries the image (picture) and sound (audio) through a single cable.
Composite connection (RCA connectors) is recognized by the three (yellow, red and white) standardized color coded RCA connectors. Yellow carries the image (picture); red (right channel) and white (left channel) carry the sound (audio) of the signal.
Component connection (RCA connectors) is recognized by the three (green, blue and red) standardized color coded RCA connectors for image (picture) plus the two (red and white) standardized color coded RCA connectors for the sound (audio) of the signal.
HDMI
Programming Your Cable or Satellite Box Remote
Consult your Cable or Satellite Owner’s Manual to determine if you need a 3, 4 or
•
•
•
Your new TV set is now ready to automatically reproduce the best picture quality from the input signal being fed into it. Enjoy your VIZIO HDTV.
These small arrows correspond to
OK | the arrows shown in the above Steps. |
|
They surround the OK key.
Legend
Optional Components
ENHANCE YOUR VIZIO EXPERIENCE
When it comes to components and accessories, don’t settle for less than VIZIO. We offer a full line of products specifically designed to accentuate your VIZIO HDTV.To learn more about how you can enhance your VIZIO experience, call
VIZIO
Our VIZIO Certified HD cables carry the same standards of excellence as all our VIZIO products. Available in: DVI, HDMI and Component in lengths of 2, 5, and 10 meters.
VIZIO CERTIFIED MOUNTS
FLUSH MOUNT- turn your HDTV into a work of art
TILT MOUNT- adjust your HDTV for the most comfortable viewing position
ARTICULATING ARM- position your HDTV exactly where you want it
©2008 VIZIO Inc.
