VocoPro 8800 setup guide VP-2100PRO to VX-15 speakers, VSP-M1 to KJ-7800PROVSP M1

4 VP-2100PRO to VX-15 speakers

Speakers 1 and 2

Using the SPEAKON style to ¼” adapter and ¼”(m) to ¼”(m) cable (included):

1.Connect the SPEAKON style end to CH.1 on the rear panel of the VP-2100PRO

2.Connect one end of the ¼” cable to the ¼” end of the adapter

3.Connect the other end of the ¼” cable to one of the four VX-15’s.

3.Repeat this for the second speaker, except now connect the SPEAKON style end to CH. 2 on the VP-2100PRO and the ¼” end to the second VX-15 speaker.

Speakers 3 and 4

VP 2100

	-BRIDGE+
	����	����
	������	����	��
	�������		�������
	����	����	���
	������	�������
		��������
�������������������	������������������������������

VX-15 Speaker #1	VX-15 Speaker #2
VX-15 Speaker #3	VX-15 Speaker #4

Using a ¼”(m) to ¼”(m) cable

1.Connect one end of the ¼” cable to the open ¼” jack on the rear of Speaker 1

2.Connect the other ¼” end to the back of the 3rd speaker.

3.Repeat this for the final speaker now going from the back of Speaker 2 and into the 4th speaker.

5 VSP-M1 to KJ-7800PROVSP M1

Using either a pair of XLR(f) to XLR(m) or XLR(f) to ¼” cables: 1.Connect the XLR(f) end to the LEFT BALANCED OUPUT

on the rear panel of the VSP-M1.

2.Now connect the XLR(m) or ¼” end to MIC input 1 on the front of the KJ-7800PRO.

3.Follow the above steps, now going from the RIGHT

BALANCED OUPUT on the VSP-M1to MIC input 2 on the	remote
	key control
front of the KJ-7800PRO.
	KJ 7800

6 UHF-5800 wireless microphones

You can either run the UHF-5800mics through the VSP-M1or go straight into the KJ-7800PROmixer.

UHF 5800 UHF 5800

VSP M1 KJ 7800