VocoPro CDG-X3P Rear panel controls and functions, Rear Panel, Do Not Replace The Fuse

Rear panel controls and functions

Rear Panel

						3
10	9	8	7	6	5	4
						2
11
						1

1.AC POWER CORD - Plugs into any AC wall outlet.

2.FUSE - IMPORTANT! If the fuse blows out it’s a good indication that there may be a short in the system.

DO NOT REPLACE THE FUSE!

Doing so could possibly cause additional damage to the unit. Take your CDG-X3P to an authorized repair facillity.

3.117/200W AC OUTLET - This outlet can be used to connect another component providing it does not exceed 200 watts maximum power consumption.

4.RECORD OUT TERMINAL – Connect to the audio input jacks of another recording device.

5.VIDEO OUTPUT JACKS - Connect to the video input jacks of a TV monitor.

6.PRE-OUT TERMINAL - Connect to the audio input jacks of an amplifier.

7.LD INPUT JACKS - Connect to the audio and video output jacks of a laser disc player.

8.VD - Connect to the audio and video output jacks of a HI-FI V.C.R.

9.AUX INPUT JACKS - Connect to the audio output jacks of a player.

10.LEFT SPEAKER OUTPUT JACK: Connect to the left speaker using a speaker cable.

Note: The jack is split into positive (+) and negative (-) output jacks but is used as one jack for the right channel only.

11.RIGHT SPEAKER OUTPUT JACK: Connect to the right speaker using a speaker cable.

Note: The jack is split into positive (+) and negative (-) output jacks but is used as one jack for the left channel only.

14