VocoPro CDG-X3P owner manual Troubleshooting, tor”, or VCR. See

Troubleshooting

Problem	Possible Cause	Solutions
No video signal. Words don’t	The television may not be	Be sure the television is set
appear on the TV monitor.	switched to the proper video	to the “VIDEO” mode (see your
	input channel.	television’s owners manual).
		Be sure the “VIDEO OUTPUT”
		jack (See PARTS AND FUNC-
		TIONS diagram) on the rear
		panel of the CDG-X3P is
		connected to the “VIDEO INPUT”
		section of the TV monitor.
Unable to connect the CDG-X3P	Not all televisions/monitors have	You will need an “RF Modula-
to my television monitor	“RCA” connector jacks.	tor”, or VCR. (See
with the “RCA” cable provided.		diagram for “CONNECTING A
		TELEVISION MONITOR “. There
		are three options for connecting
		televisions without video input
		jacks.

There is a loud “squealing” noise	This noise is called “feedback”.	Turn down the microphone
coming from speakers.	Feedback occurs for various	volume.
	reasons. For example, feed-
	back can occur if the micro-	Turn down the treble control.
	phone is held too closely to, or
	pointed directly at, the speak-
	ers . Feedback can also occur	Hold the microphone away
	if the microphone volume is	from the speakers.
	too high or there is too much
	treble frequency being used.

20