VocoPro Club-8000 quick start CDG-9000PRO player unit to KJM-8000+, KJM-8000+to VP-2100PRO

2 CDG-9000 PRO player unit to KJM-8000+

You have the option of either connecting each deck of the CDG-9000 PRO separately (Fig. 1) or together through a single SWITCHED output (Fig. 2).

Separately through individual deck outputs (Fig.1)

Using RCA cables:

1.For each deck, connect the L/R (red & white) audio outputs and Video (yellow) output on the CDG-9000 PRO to the CDG(1) and DVD(3) inputs on the rear panel of the KJM-8000+

CDG-9000 PRO Player

CDG(1)	CDG(1)
DVD(2)	DVD(2)
LD(3)	LD(3)

Together through SWITCHED output (Fig. 2)

Using RCA cables:

1. Connect the L/R SWITCHED audio and SWITCHED video outputs on the CDG-9000 PRO player to the CDG(1) audio input on the KJM-8000 PRO

CDG(1)

DVD(2)

KJM-8000+ Mixer

CDG-9000 PRO Player

KJM-8000+ Mixer

LD(3)

3 KJM-8000+ to VP-2100 PRO

You can do this using either XLR(f) to XLR(m) cables or XLR(f) to ¼”(m) cables. Below are instructions for each.

Using two XLR(f) to XLR(m) (Fig.1)

1.Connect the XLR(f) end to the LEFT MASTER AUDIO XLR output on the KJM-8000+ and the XLR (m) end to the left XLR audio input on the VP-2100 PRO.

2.Now do the same thing except now go from the RIGHT MASTER AUDIO XLR output on the KJM-8000+ and the right XLR audio input on the VP-2100 PRO

Using two XLR(f) to ¼”(m) (Fig. 2)

1.Connect the XLR(f) end to the LEFT MASTER AUDIO XLR output on the KJM-8000+ and the ¼”(m) end to the CH. B ¼” audio input on the VP-2100 PRO.

2.Now do the same thing except now go from the RIGHT MASTER AUDIO XLR output on the KJM-8000+ and the CH. A ¼” audio input on the VP-2100 PRO.

	-BRIDGE+
		CH 2	CH 1
		STEREO	50Hz	ON
		THROUGH		THROUGH
		MONO	30Hz	OFF
		BRIDGE	LOW CUT
			FILTER/
MODEL VP-2100PRO	SPEAKER OUTPUTS	BALANCED INPUTS

CDG(1)

DVD(2)

LD(3)

VP-2100 PRO Amplifier

KJM-8000+ Mixer

	-BRIDGE+
		CH 2	CH 1
		STEREO	50Hz	ON
		THROUGH		THROUGH
		MONO	30Hz	OFF
		BRIDGE	LOW CUT
			FILTER/
MODEL VP-2100PRO	SPEAKER OUTPUTS	BALANCED INPUTS

CDG(1)

DVD(2)

LD(3)