11
1. MIC MUTE switch - Mutes the microphone vocal output. Swtich ON to mute the microphone vocals
and OFF to unmute the microphone vocals.
2. WIRELESS INPUT - This input is dedicated for the output from wireless microphone systems.
3. RECORD OUT - These RCA output jacks are designed for connection to a recording device such as a
cassette deck, CD burner or hard disc recorder. Output from the RECORD OUT jacks is line-level, so the
MASTER VOLUME controls will not affect the output signal to your recording device.
4. VIDEO INPUT - Connect the RCA style video output from your CDG, AUX, and DVD player to the respective
jacks in this section.
5. MIC OUT - Using these RCA output jacks, you can isolate your mic mix, without the source music
audio input, for output to an external device.
6. ECHO EFFECT ON/OFF - This switch will assign ECHO to the mic mix output through MIC OUT (#2).
7. MIC INSERT - This jack is used for connection of an outboard processor such as a compressor using
only a single 1/4” TRS (Tip = send, Ring = return, Sleeve = signal ground).
8. VIDEO OUTPUT - Connect RCA style video cables from these outputs to the video inputs of your TV or
other video monitor device.
9. HEADPHONE jack (¼”) - Connect headphones here.
10. VOLTAGE SELECTOR - Using this switch you can select between 120V and 240V power settings
11. AC POWER OUTLET - This unswitched AC outlet is for providing power to an external device. NOTE:
DO NOT CONNECT A DEVICE THAT IS DESIGNED FOR 240V USE OR HAS A POWER CONSUMPTION LEVEL
HIGHER THAN 200W.
Rear Panel Descriptions and Functions
47910 11
236
18
5