VocoPro The Bravo Digital CDG and Cassette Karaoke Player

IMPORTANT INFORMATION ABOUT RECORDING WITH THE BRA VO:

When recording with The Bravo, the bass and treble settings you use, will be recorded exactly as they are set while your are recording,

so that you have more control over your recording. The important thing to remember is to RESET THE CONTROLS TO A “FLA T”

SETTING WHEN LISTENING BACK TO YOUR RECORDING ON THE BRAVO, otherwise the bass and treble settings will sound

doubled. In other words, when listening to your recording ON THE BRAVO, you will need to reduce the amount of bass and treble [but

only] while listening, otherwise your recording MA Y sound distorted. When playing the recording on another tape deck it should sound

as it did when you recorded it.

USING THE CASSETTE DECK TO PLAY OR PLA YBACK

1. Locate the “CASSETTE” button under the CD tray on the front of the unit (See diagram) NOTE: When recording,

this button should be set to “CDG”.

2. Press once to change to cassette mode for playing and recording cassette tapes.

3. Locate the “ST/EJ” button on the front of the cassette deck and press to open cassette door.

4. Insert the cassette tape with the side you want to play facing you and carefully close the cassette door, never force.

5. To rewind the cassette press the ”REW’ button until the tape rewinds to the desired location.

6. To advance the cassette press the “F-FWD” button until the tape advances to the desired location.

7. To stop either function locate the “STOP” button and press once. This will stop advancing, rewinding or playing the

cassette tape.

8. To play the desire selection locate the “PLAY” button and press once.

NOTE: The graphics function will not work with cassette tapes.

CHANGING THE KEY OF THE MUSIC USING THE CASSETTE DECK

Follow the same instructions for changing the key or pitch with the cassette deck as for changing the key for the CD/CDG player.

See: RAISING OR LOWERING THE PITCH (OR KEY) OF THE MUSIC. (ABOVE)