Descriptions and Functions
1.BNC Antenna Connector - Connect the antenna here. To attach, press and twist clockwise until the connector latches. To detach, press and twist counter-clockwise
2 . RF Indicator LED - This LED will turn on when the UHF-18 detects a wireless signal from the wireless microphone. (When the wireless microphone is switched on)
3 . AF Indicator LED - This LED will turn on when the UHF-18 detects an audio signal from the wireless microphone. (When the wireless microphone is spoken or sung into)
4 . Power Indicator LED - Th is LED will turn on when the UHF-18 is powered on.
5 . Power/Volume Dial - This dial will turn on the UHF-18. Turn the dial clockwise , it will click, turning the unit on. When the UHF-1 8 is on, this dial is used to adjust the volume of the wireless mics. Turn the dial clockwise to increase the volume and counter-clockwise to decrease the volume. To turn the UHF-18 off, turn the dial completely counter-clockwise until it clicks
�� �
Rear Panel
1.Power Connector - When using the UHF-18 as a stand-alone unit, connect the power adapter here . When using the UHF-18 as a plug-in module , this plug is not used.
NOTE: Plugging in the power adapter when using the UHF-18 as a plug-in module may result in damage to the UHF-18.
2 . 1/4” MIC OUT Jack - When using the UHF-18 as a stand-alone unit, connect a cable from this jack to the mic input on your mixer or other device. When using the UHF-18 as a plug-in module, this plug is not used.
3 . Multi-Purpose Plug - When using the UHF-18 as a plug-in module, connect the multi-purpose cable from the plug-in slot to this plug . When using the UHF-18 as a stand-alone unit, this plug is not used.
