2
1
• Locate the lock fasteners in the back end of the seat.
• Using a slotted screwdriver, turn the lock fasteners a 1/4 turn to
the unlocked position .
• Lift the seat to remove it from the vehicle.
e Lock Fasteners
IMPORTANT! Use only a Power Wheels® 6 volt, 4 Amp/Hr
rechargeable battery and built-in thermal fuse. Use of any other
battery will damage your vehicle. Make sure that you charge the
battery for at least 18 hours using the enclosed Power Wheels® 6
volt charger before operating your vehicle for the first time. Charge
the battery for at least 14 hours after each use of the vehicle. Never
charge the battery longer than 30 hours. Failure to follow these
instructions may damage your battery and will void your warranty.
Seat
e Unlocked
P5921pr-0920
12
BATTERY INSTALLTION
3
• While pressing the vehicle tab, lift the edge of the battery retainer.
• Place the Power Wheels® 6 volt battery upright in the battery
compartment, as shown.
Battery
Battery
Compartment
Battery
Retainer
4
• Rotate the battery retainer down until it "snaps" into place. Pull
up on the battery retainer to be sure it is secure.
Battery
Retainer