H3428pr-0720
5
• Insert a #10 x ¾" trusshead screw through the front end of the
vehicle and through the hole in the bracket.
• Attach the #10 lock nut to the end of the trusshead screw.
• While holding the lock nut in place with an adjustable wrench,
tighten the screw.
#10 x ¾"
Trusshead Screw
#10 Lock Nut
Screw
Lock Nut
Steering
Wheel Cap
Steering
Wheel
6

DASH VIEW

• Turn the vehicle upright.
• Fit the steering wheel cap into the center of the steering wheel.
• Insert two #6 x 1" screws through the steering wheel cap and
into the steering wheel. Tighten the screws.
P5921pr-0920
9
ASSEMBLY7
• Insert the seat front tabs into the slots inside the vehicle.
• Then, insert the lock fastener tabs on the back of the seat into the
slots in the vehicle.
• Using a slotted screwdriver, turn each lock fastener a 1/4 turn to
the locked position.
IMPORTANT! Remember to keep the lock fasteners locked
at all times to prevent children from accessing the vehicle
battery compartment.
Unlocked
Locked
Seat
Lock Fastener Tabs
REAR VIEW
Hubcap
Hubcap Cover
Slots
Tab Tab
Tab
Tab

SIDE VIEW

8
• Turn the vehicle upright (or keep it on its side).
• Insert one of the tabs on the hubcap cover into a slot in
the hubcap.
• Then, push with your fingernail (or carefully with a slotted
screwdriver), the other two hubcap cover tabs into the slots in
the hubcap.
• Repeat this assembly step to attach the other three
hubcap covers.