WARNING: To avoid risk of fire, electrical shock, or injury to persons, unplug the Air Circulator before removing the grill.
Models 510, 530, 610, 630, 723, 733, 743, 783, 735, 745, 795 • Remove the screw (only necessary on model 530). Depress one of the grill clips (A) by placing your thumb against the outside surface of the clip and pressing down- ward towards the motor, applying slight pressure forward. A flathead screw- driver can also be used if the clips are difficult to release. Usually by releasing one clip, the grill can be removed. If the grill cannot be removed, repeat the process on remaining clips. Replace by lining up the clips with the holes and firmly snapping the grill back into place. Replace the screw (model 530 only).
Grill Removal
Models 533, 633, 753 • Remove the 3 screws located in between the ribs of the inlet grill at roughly 10, 2, and 6 o’clock positions. Screw locations are indicated by an arrow on the side of air inlet (B). Do Not remove the 2 screws on the pivot arms. Place the circulator facing you. Position your hands at the 10 and 2 o’clock positions, lift up and back on the outer grill to release the grill clips (C). If necessary repeat the process against the remaining two clips at the 5 and 7 o'clock positions. Replace by lining up the clips with the holes and firmly snapping the grill back into place. Replace all the screws.
Screw ² (530 only)
A
² | ² |
| ² |
² | ² |
² | ² |
B
C
English 9
