VOX VC-12 EasyStart

Load VC-12 Program Data into your Valvetronix amp:

1.Turn off the Valvetronix amp and make sure it’s connected to the VC-12’s VOX BUS MAIN connector.

Note: Don’t connect anything to the VC-12’s VOX BUS SUB connector.

2.On the Valvetronix amp, while holding down the DELAY [TAP] button and the REVERB [TYPE] button, turn on the amp.

The VC-12’s BANK display shows [bU] BackUp.

3.Press the VC-12’s BANK DOWN switch. The VC-12’s BANK display shows [tr] Transmit.

4.Use the switches 1 through 4 to select the memory (1, 2, 3, or 4) containing the program data that you want to load.

The switch’s LED flashes.

If you want to cancel the procedure at this point, press the switch again, or press the VC-12’s RECALL switch.

5.To load the selected memory’s program data, press the VC-12’s CHANNEL-FX ON/OFF switch. The program data is sent to the Valvetronix amp.

When the data loading process is complete, “4.” appears on the Valvetronix amp’s BANK display.

6.Turn off the Valvetronix amp, and then turn it on again. This completes the procedure for loading data.

VC-12 Preset Program List

Switch #1

These programs let you switch between the four sounds in each bank without using Individual mode; It’s the “lazy man’s mode” — just push one switch to get the sound. Since the programs are arranged in the same order, the Bank number tells you whether you are using Clean, Crunch, Dirty, or Solo.

Bank 1

 

 

 

1-1 CLEAN1

1-2 CRUNCH1

1-3 DIRTY1

1-4 SOLO1

Bank 2

 

 

 

2-1 CLEAN2

2-2 CRUNCH2

2-3 DIRTY2

2-4 SOLO2

Bank 3

 

 

 

3-1 CLEAN3

3-2 CRUNCH3

3-3 DIRTY3

3-4 SOLO3

Bank 4

 

 

 

4-1 CLEAN4

4-2 CRUNCH4

4-3 DIRTY4

4-4 SOLO4

Switch #2

Bank 1

1-1 MARATHON- Powerful, clean sound from Canada’s godfather of progressive rock. Use Single Coil Pickups (Bridge/Middle Position) or Coil Split on Humbuckers. Preset works great for other lush clean sound classics of the same artist too.

1-2 LAVILLA- Rich Distortion Tone which suits the outstanding instrumental tune coming out of Northern Lerxstland. Use Bridge Humbucker on your guitar.

1-3 WOLFMAN- Trademark German Metal Tone from razorblade city, which combines a full driven British stack with the classic treblebooster. Use Bridge Humbucker and let those V’s fly.

1-4 STILLBLUE- Irish Guitar Legend’s silky smooth blues lead tone. Use Neck and Bridge Humbucker.

4

Page 4
Image 4
Vox Vc12 manual VC-12 Preset Program List, Switch #1, Switch #2