Table/Desk Installation, Check for dial tone | VTech 2428 instruction

INSTALLATION

television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.

Table/Desk Installation

CONNECT THE POWER CORD

Standard electrical outlet

CONNECT THE

TELEPHONE LINE CORD

Modular telephone jack

4.Charge the handset battery.

Place the handset in the base. Charge the battery for at least 12 hours the first time.

5.Check for dial tone

After the batteries are charged, connect the modular telephone cord between a live phone jack and the jack located on the bottom of the Base Unit. Pick up the Handset and press PHONE. You should hear a dial tone.

6.Set the dial mode.

If you have touch tone service, the phone is ready to use as soon as the batteries are charged. If you have dial pulse (rotary) service, you’ll need to change the dial mode.

•Press PROG/CHAN on the handset to enter programming mode.

•Press or until the screen displays DIAL MODE: and the currently selected mode.

•Press SELECT.The current setting blinks.

•Press to select TONE or PULSE .

•Press SELECT, to save the displayed mode.

4

Image 6

VTech 2428 manual Table/Desk Installation, Check for dial tone

Contents

2428 Contents Important Safety Instructions Before YOU Begin About Caller Identification Caller IDParts Check List Installation Before You Install Table/Desk Installation Check for dial tone Telephone Operation Program/Channel Service provider if the FSK signal is available in your area Handset Ringer Style/Battery Save Temporary Tone DialingHeadset Jack Operating Range Telephone Memory Store a Number or Name in Memory Edit a Number/Name Stored in Memory Delete a Number/Name Stored in MemoryDial a Memory Number Telephone Directory Store a Number/Name in the Directory Edit a Number/Name Stored in the Directory Delete a Number/Name Stored in the DirectoryDial a Number from the Directory Review Call History Caller ID OperationAbout Call History Delete a Specific Call Dial a Displayed Number Store a Call History Record in the Directory Replacing the Handset Battery Pack Batteries Case of Difficulty If the phone does not ring when you receive a callIf you hear noise or interference when using the phone If the phone doesn’t work at all, check these items first If you hear other calls while using your phone If you lose a call after changing channels Maintenance How Long is the limited warranty period ? Warranty StatementWhat does this limited warranty cover? What is not covered by this limited warranty ? Other Limitations FCC and IC Regulations FCC Part IC Industry Canada Rbrc Seal Technical Specifications Rbrc Seal Issue