Key tone, Set date and time | VTech CS6114 specification

Telephone settings

Key tone

You can turn the key tone on or off.

1.Press MENU/SELECT when the handset is not in use.

2.Press CID or until the screen displays Settings, then press MENU/SELECT.

3.Press CID or until the screen displays Key tone, then press MENU/SELECT.

4.Press CID or to choose On or Off, then press MENU/SELECT to confirm your selection. You hear a confirmation tone.

Set date and time

Settings

Key tone

On

If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call. You can also set the date and time manually.

1.Press MENU/SELECT when the handset is not in use.

2.Press CID or until the screen displays Settings, then press MENU/SELECT.

3.Press CID or until the screen displays Set date/time, then press MENU/SELECT.

4.When the month is flashing, press CID or until the screen displays the correct month and then press MENU/SELECT; or, press the dialing keys (0-9) to enter the current month (for example, if the month is March, you must enter 03).

5.Repeat step 4 to set the correct date and year and then press MENU/SELECT to advance to set the time.

6.When the hour is flashing, press CID or until the screen displays the correct hour and then press MENU/SELECT; or, press the dialing keys (0-9) to enter the current hour (for example, if the time is two o’clock, you must enter 02).

7.Repeat step 6 to set the correct minute.

8.When AM or PM is flashing, press CID or to select AM or PM. Press MENU/SELECT to save your settings. You hear a confirmation tone.

Settings

Set date/time

Date: 03/25/10

Time: 02:35 PM

When there is a power failure or after battery replacement, the time needs to be reset.

Image 12

VTech CS6114 user manual Key tone, Set date and time

Contents

Online user’s manual Congratulations Table of contents Parts checklist Getting started Telephone base installation Wall mounting Battery installation Charge Battery charging Telephone base layout Handset layout CID/VOL MENU/SELECT Telephone settings Using the menuRinger volume Ringer tone To change the setting To manually turn off these indicatorsLCD language Clear voicemail Key tone Set date and time Dial mode Home area codeWebsite Telephone operation Temporary ringer silencing Temporary tone dialingFind handset Chain dialing Redial listReview the redial list Dial a redial entry Delete a redial entryDirectory Add a directory entry Character chart Review the directoryTo search the directory Alphabetical search Dial a directory entryEdit a directory entry To start an alphabetical search Delete a directory entry About caller IDInformation about caller ID with call waiting Missed call indicator Call log Memory match Review the call logView dialing options Dial a call log number Save a call log entry to the directory Delete the call log entries Call log display screen messages Appendix Display screen messages Handset and telephone base indicators Handset lightTelephone base light Handset screen icons Battery Battery needs charging when Troubleshooting My telephone does not work at allThere is no dial tone Cannot dial out Low battery shows on the handset screen Telephone does not ring when there is an incoming callCharge light is off Hear other calls when using the telephone My handset beeps and is not performing normallyHear noise on the cordless handset and the keys do not work My caller ID features are not working properly Out of range or no pwr at base shows on the handset screen Cannot retrieve voicemail messages Common cure for electronic equipment Important safety instructions Precautions for users of implanted cardiac pacemakers MaintenanceOperating range About cordless telephones Rbrc seal Warranty What does this limited warranty cover? FCC Part FCC Part 68 and Acta Technical specifications Index Index