Outgoing announcement
The telephone is preset with a greeting that answers calls with “Hello, please leave a message after the tone.” You can use this preset announcement, or replace it with your own.
Use a handset to record your own announcement:
1.Press MENU/SELECT to show the menu when the handset is not in use.
2.Press MENU/SELECT to select >ANS. SYSTEM.
3.Press or to select >ANS SYS SETUP, then press MENU/SELECT.
4.Press or to select >ANNOUNCEMENT, then press MENU/SELECT.
5.The handset announces, “To play, press 2. To record, press 7.” Press 7 to record.
6.The handset announces, “Record after the tone. Press 5 when you are done.”
7.After the tone, speak towards the microphone of the handset.
8.Press 5 when finished.
9.The answering system automatically plays back the newly recorded announcement. Press 5 to stop the playback at anytime; 2 to replay the recorded announcement; or 7 to record again if desired; or 3 to delete your own recorded announcement.
To play messages with the telephone base:
Press /PLAY/STOP to play messages and stop playback.
Options during playback:
•Press VOL to adjust the speaker volume.
•Press /SKIP to skip to the next message.
•Press /REPEAT to repeat the message currently playing. Press /REPEAT twice to listen to the previous message.
•Press X/DELETE to delete the current message.
To play messages with a handset:
1.Press MENU/SELECT to show the menu when the handset is not in use.
2.Press MENU/SELECT to select >ANS. SYSTEM.
3.Press MENU/SELECT to select >PLAY MSGS.
Options during playback:
•Press VOL to adjust the speaker volume.
•Press 6 to skip to the next message.
•Press 4 to repeat the message currently playing. Press 4 twice to listen to the previous message.
•Press 3 to delete the current message.
•Press 5 to stop.
IMPORTANT!
If your product is not working properly:
•Refer to the Troubleshooting section of the user’s manual.
•Visit our website at www.vtechphones.com or call 1 (800)
In Canada, go to www.vtechcanada.com or dial 1 (800)