Quick start guide
Battery installation and charging
Install the battery as shown below. After installing the battery, you might be able to make and receive short calls. For best performance, charge the handset battery for at least 16 hours before use.
Make, answer and end a call Make a call
1. Press 
/FLASH or 
. You hear a dial tone.
2. Dial the number.
Turn the answering system on or off
The answering system must be turned on to answer and record messages.
When the answering system is turned on, the ANS ON/OFF light on the telephone base will be on and ANS ON will display on the handset.
for models
Install the telephone base and charger(s)
Install the telephone base and charger(s) as shown below.
1
If the battery compartment cover is on the handset, press the indentation and slide the cover to remove.
2
Plug the battery securely into the plug inside
the handset battery compartment, matching the
Make a predial call
1. Dial the number.
2. Press 
/FLASH or 
.
Answer a call
Press 
/FLASH, 
or any of the dialing keys
End a call
To turn on or off with the telephone base:
• Press ANS ON/OFF to turn the answering system on or off. If the answering system is
turned on, it announces, “Calls will be answered.”
If the answering system is
Telephone | Telephone |
base power | |
wall jack | adapter |
If you have DSL | Charger adapter |
high speed Internet | |
service, a DSL |
|
filter (not included) | |
is required. |
|
| Electrical outlet |
Telephone | not controlled by |
a wall switch | |
line cord
Charger
Telephone base
3 |
|
| 4 |
|
|
|
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
| ||
| ||||||
Place the battery with | Align the cover flat | |||||
the label THIS SIDE | against the battery | |||||
UP facing up and the | compartment, then slide | |||||
wires inside the battery | it towards the center of | |||||
compartment. | the handset until it clicks | |||||
|
|
| into place. | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press OFF/CLEAR or put the handset in the telephone base or charger.
turned off, it announces, “Calls will not be answered.”
To turn on or off with a handset:
1.Press MENU/SELECT to show the menu when the handset is not in use.
2.Press MENU/SELECT to select >ANS. SYSTEM.
3.Press 
or 
to select >ANS SYS SETUP, then press MENU/SELECT.
4.Press MENU/SELECT to select >ANSWER ON/OFF.
5.Press 
or 
to choose ON or OFF, then press MENU/SELECT.
1.Use only the power adapter(s) and battery(ies) supplied with your VTech telephone.
2.For complete feature instructions, please refer to your user’s manual.
5
Charge the handset by | CHARGE light |
placing it in the telephone |
|
base or charger. The |
|
CHARGE light is on when |
|
the handset charges. |
|
