58
Appendix
Screen messages
Not available Another handset is already in the directory, caller ID log, or
accessing the answering system.
Number repeated The telephone number you have entered is already stored in
the directory.
Out of range or
no pwr at base
The telephone base has lost power, or the handset is out
of range.
Phone The handset is on a call.
Put in charger The battery is very low. Put the handset in the telephone base
or charger for recharging.
Quiet mode on The quiet mode is turned on.
Quiet mode off The quiet mode is turned off.
Rec mem full The answering system has no recording time left.
Rec mem low The answering system has less than three minutes of recording
time left.
Registering... The handset registration is in progress.
Ringer muted The handset ringer is muted temporarily during an incoming call.
Ringer off The handset ringer is turned off.
Saved Your selection has been saved.
Speaker The handset speakerphone is in use.
To screen call
press [SELECT]
The system is recording a message. Press SELECT to screen a
call on a handset.
To register HS
See manual
Screen display on a non-registered handset.
Transferred You have transferred an outside call to another cordless
handset.
Unable to call The handset is out of range while on a call.
Failed phone call (the telephone line is in use).
Failed intercom call (there are already two handsets being used).
XX missed calls There are new calls in the caller ID log.
XX new messages There are new messages in the answering system.
** Paging ** All system handsets are being paged.