VTech CS6529-16, CS6529-4B, CS6529-3, CS6529-25, CS6529-17 Remote access code, Message alert tone

Answering system settings

Remote access code

A two-digit security code is required to access the answering system remotely from any touch-tone telephone. The preset code is 19. You can set the code from 00 to 99.

1.Press MENU when the phone is not in use.

2.Press or to scroll to Answering sys, then press SELECT.

3.Press or to scroll to Ans sys setup, then press SELECT.

4.Press or to scroll to Remote code, then press SELECT.

5.Use the dialing keys (0-9) to enter a two-digit number, or press or to scroll to a desired two-digit number. Then press SELECT to confirm your selection. You hear a confirmation tone.

Ans sys setup

ECO

Remote code

ECO

Remote code

19

ECO

Message alert tone

When the message alert tone is set to on, and there is at least one new message, the telephone base beeps every 10 seconds.

To turn this feature on or off:

1.Press MENU when the phone is not in use.

2.Press or to scroll to Answering sys, then press SELECT.

3.Press or to scroll to Ans sys setup, then press SELECT.

4.Press or to scroll to Msg alert tone, then press SELECT.

5.Press or to choose Tone: On or Tone: Off, then press SELECT to confirm your selection. You hear a confirmation tone.

•The answering system must be turned on for the message alert tone to be functional.

•Press any key on the telephone base (except FIND HANDSET) to temporarily silence the message alert tone.

Ans sys setup

ECO

Msg alert tone

ECO

Tone: Off

ECO

46