Connect
You can choose to connect the telephone base for desktop usage or wall mounting.
NOTES
•Use only the power adapters supplied with this product.
•Make sure the electrical outlets are not controlled by wall switches.
•The adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling,
TIP
•If you subscribe to digital subscriber line (DSL)
Mount the telephone base
The telephone comes ready for tabletop use. If you have already installed the telephone for tabletop use, unplug the telephone line cord from the telephone wall jack, and unplug the telephone base power adapter from the wall outlet before mounting your telephone on a wall. Follow the steps below to mount your telephone on a wall.
1.Route the telephone line cord through the rectangular hole on the wall mount bracket. Then plug the two ends of the telephone line cord into the telephone base and the wall outlet as shown.
Connect the telephone base
2 Align the holes on the bracket with the standard wall plate and slide the bracket down until it clicks securely in place.
Connect the charger
A
