VTech DS6511 Caller ID, Add and register a handset, Replace a handset, To register a handset

Caller ID

This product supports caller ID services provided by most telephone service providers. Depending on your service subscription, you may see the caller’s name, number, date and time of calls that are sent by your telephone service provider after the first or second ring.

Caller ID log

The caller ID log stores up to 50 entries. If you answer a call before the caller information appears, it will not be saved in the caller ID log.

•The handset displays XX missed calls when there are calls that have not been reviewed in the caller ID log.

•If you want to erase the missed call indicator, press and hold CANCEL on the idle handset.

To review and dial a number in the caller ID log: . Press CID when the phone is not in use.

2.Scroll to browse through the caller ID log. When the desired entry appears:

•Press repeatedly to show different dialing options.

•Press 1 repeatedly if you need to add or remove 1 in front of the phone number.

3.Press /HOME, or /CELL to dial the displayed number.

To save a caller ID log entry to the directory:

. When the desired caller ID log entry displays, press SELECT.

2.Use the dialing keys to modify the number, then press SELECT.

3.Use the dialing keys to modify the name, then press SELECT to save.

To delete a caller ID log entry:

•When the desired caller ID log entry displays, press DELETE.

To delete all caller ID log entries:

•Press MENU when the phone is not in use. Scroll to Caller ID log and then press SELECT. Scroll to Del all calls and then press SELECT twice.

Add and register a handset

The handsets provided with your telephone system are already registered. Each handset is assigned a number that displays on the handset. Additional handsets registered to the telephone system are assigned numbers in the sequential order. This telephone system accommodates up to five handsets.

You can add new handsets (DS6501/DS6501-12/DS6501-15/DS6501-16, purchased separately) to your telephone system. Each handset must be registered with the telephone base before use. When first purchased and properly charged, each expansion handset shows To register HS... and ...see manual alternately. Charge the handset before registering it to the telephone base.

To register a handset:

. Place the new/non-registered handset in the telephone base.

Do not place the handset in the charger.

2.Wait for about 10 seconds. The handset shows Registering... then Registered and you hear a beep when the registration process completes. The registration process takes about 90 seconds to complete.

Replace a handset

If you want to replace a handset or reassign the designated handset number of a registered handset, you must deregister all handsets and then individually register each handset.

To deregister all handsets:

. Press and hold FIND HANDSET on the telephone base for about 10 seconds

until the IN USE light on the telephone base turns on and starts flashing.

2.Immediately press FIND HANDSET again. You must press FIND HANDSET while the IN USE light is still flashing. The IN USE light flashes for approximately five seconds.

3.All handsets show To register HS... and ...see manual alternately when the deregistration process completes. The deregistration process takes about 10 seconds to complete.