Headset Operation
Headset Operation
Your IP 811 handset is equipped with a 2.5mm headset jack for use with an optional accessory headset for handsfree conversations. If you choose to use the headset option, you must obtain an optional accessory headset that is compatible with the IP 811.
To purchase a headset, visit us on the web at www.vtechphones.com or call VTech Customer Service at
Once you have a compatible 2.5mm headset, locate the headset jack on the IP 811 handset. Connect the plug on the headset cord to the jack (under a small rubber flap) on the cordless handset. The plug should fit securely. Do not force the connection.
NOTE:
•Whenever a compatible headset is conn-
ected to the cordless handset, the micro- phone on the handset will be muted. This is done to limit the effect of background noise.
• When a compatible headset is connected to the cordless handset, your speaker- phone feature will be disabled. To use your speakerphone feature, simply disconnect the headset from the handset.
Belt Clip
The IP 811 is also equipped with a detachable belt clip. Align the pins on the inside edge of the clip with the notches on the sides of the hand- set. The belt clip should snap securely into place. Do not force the connection.
Advanced Operation
9
