VTech IP 811 manual Registration, Started

Registration

Started

Your IP 811 is an accessory handsets for use with the

register your IP 811 for the first time:

1.After charging the battery, the screen will display:

.

2.Enter the 15 digit base unit ID code, located on the underside of your IP 8100-2/8100-3 base. If you make a mistake, press the DELETE key to backspace (delete characters), then enter the correct information.

3.Press SEL to complete the registration process.

4.Once a valid base ID code has been entered, the display will blank for a second or two, and then show:

IP 8100-2/8100-3 base unit. To

ENTER BASE ID

###############

S E A R C H I N G . . .

Getting

5. If the base accepts the new handset, after several	HANDSET X
seconds the new handset will show:
Where X is the new handset number assigned,
sequentially, by the base.

NOTE: If any of the digits are entered incorrectly press the DELETE key to erase a character(s) and carefully re-enter the correct base ID code. If you have entered any digits incorrectly you will hear an error tone after the SEL key is pressed. The 15-digit base ID code may contain numbers and characters, in- cluding 0 through 9 and *. Make sure you enter all 15 digits.

7