Troubleshooting | |
|
|
Problem | Suggestion |
|
|
I cannot dial out. | • Make sure you have a dial tone before dialing. The handset may take a second or two to find the base |
| and produce a dial tone. This is normal. Wait an extra second before dialing. |
| • Make sure your phone is set to the correct dial mode for the type of service that you have (pulse or |
| touchtone). Refer to the Installation section of this user’s manual to set the dial mode. |
| • If the other phones in your home are having the issue, the problem is in your wiring or local service. |
| Contact your local telephone company (charges may apply.) |
| • Eliminate any background noise. Noise from a television, radio or other appliance may cause the phone |
| to not dial out properly. If you cannot eliminate the background noise, first try muting the handset before |
| dialing, or dialing from another room in your home with less background noise. |
|
|
My handset beeps four | • Make sure the power cord is securely plugged into the base. Plug the unit into a different, working outlet |
times and isn’t performing | not controlled by a wall switch. |
normally. | • Move the handset closer to the base. You might have moved out of range. |
| • Reset the base. Unplug the unit’s electrical power. Wait for 15 seconds then plug it back in. Allow up |
| to one minute for the handset and base to reset. |
| • Other electronic products can cause interference with your cordless phone. Try installing your phone |
| as far away from these types of electronic devices as possible: wireless routers, radios, radio towers, |
| pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances |
| and other cordless phones. |
|
|
26 ADDITIONAL INFO | www.vtechphones.com |
