Troubleshooting | |
|
|
Problem | Suggestion |
Can’t Connect displays | • Move the handset closer to the base. You might have moved out of range. |
on my handset. | • Reset the base. Unplug the unit’s electrical power. Wait for 15 seconds then plug it back in. Allow up |
| to one minute for the handset and base to reset. |
| • Other electronic products can cause interference with your cordless phone. Try installing your phone |
| as far away from these types of electronic devices as possible: wireless routers, radios, radio towers, |
| pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances |
| and other cordless phones. |
| • You are trying to use both system handsets at the same time. Be sure to only use one system |
| handset at a time. |
|
|
The batteries will not hold | • Make sure the battery is plugged into the handset. |
a charge. | • Be sure to use the AC power adaptor provided with your phone. |
| • Charge the battery in the handset at least 16 hours. For optimum daily performance, return the handset |
| to its base when not in use. |
| • You may need to purchase a new battery, please refer to the Batteries section of this user’s manual. |
| • Your phone might be malfunctioning. Please refer to the Warranty section of this user’s manual for |
| further instruction. |
www.vtechphones.com | ADDITIONAL INFO | 27 |
Additional Information
