FCC, ACTA and IC Regulations

FCC Part 15

This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

*Reorient or relocate the receiving antenna.

*Increase the separation between the equipment and receiver.

*Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

*Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The handset may be safely held against the ear of the user. The base unit shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more. If you choose to use a clipping device, please make sure to only use the supplied VTech belt clip.

FCC Part 68 and ACTA

This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your local telephone company upon request.

The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See Installation Instructions in the user’s manual.

The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your local telephone company.

This equipment may not be used with Party Lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited Warranty.

If this equipment is causing harm to the telephone network, the telephone company may temporarily discontinue your telephone service. The telephone company is required to notify you before interrupting service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone company is required to inform you of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone company is required to notify you if such changes are planned.

If this product is equipped with a corded or cordless handset, it is hearing aid compatible.

If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:

www.vtechphones.com

ADDITIONAL INFO 43

Additional Information

Page 42 Page 44
Page 43
Image 43
VTech t2351, t2353, t2350 warranty FCC, Acta and IC Regulations, FCC Part
Page 42 Page 44

t2351, t2353, t2350 specifications

The VTech T2350, T2353, and T2351 are part of VTech's range of cordless phones designed for user-friendly operation and enhanced communication features. These models are particularly popular due to their blend of practicality, technology, and affordability, catering to both personal and business use.

The T2350 model showcases a sleek design that integrates modern technology with everyday functionality. One of its main features is the lightweight cordless design that allows users to move freely while talking. It supports multiple handsets, allowing for scalability in larger homes or offices. The phone also boasts a large, easy-to-read LCD screen that presents call information, contacts, and settings clearly.

In terms of audio quality, the T2350 employs advanced digital technology that enhances voice clarity while minimizing background noise. This ensures crisp and clear conversations, essential for both personal and professional communication. The model includes an answering machine with a substantial recording time, ensuring users never miss important messages.

The T2353 model builds on the T2350's success with additional features geared towards enhancing user interaction. One notable addition is its caller ID functionality, which displays the name and number of incoming calls, allowing users to screen calls efficiently. The phone also incorporates a speed dial option, making it convenient to connect with frequently contacted numbers with just a single press.

For users concerned with battery life, both the T2350 and T2353 are equipped with efficient power management systems, ensuring that they can handle extended use without frequent recharging. They utilize rechargeable batteries that are easy to replace, further enhancing their longevity.

The T2351 variant, while similar in design and most features, introduces a few variations to appeal to specific user needs. It includes a unique ringer volume control system that allows users to adjust the sound based on their environment. Additionally, the T2351 offers a more extensive range of languages for display settings, catering to diverse households.

Overall, the VTech T2350, T2353, and T2351 models embody the brand's commitment to innovation and user satisfaction. With features catering to voice clarity, usability, and battery efficiency, these cordless phones serve as reliable communication tools for any household or workspace. Their classic design, combined with advanced technologies, ensures that users can always stay connected.
Top Page Image Contents